The 2025 Annual Meeting and General Meeting of the Rotomolding Special Committee of the China Plastics Association was held in Xingtai, Hebei Province
On May 16, 2025, the 2025 Annual Meeting and General Meeting of the
Rotomolding Professional Committee of China Plastics Processing Industry
Association was held in Xingtai, Hebei Province. More than 120 experts, leaders,
and enterprise representatives from the domestic rotational molding industry
attended the meeting. Wang Zhanjie, chairman of the China Plastics Association,
was invited to attend the meeting and delivered a speech.
Chairman Wang Zhanjie said in his speech that in the face of the challenges
brought about by environmental changes at home and abroad, China's plastics
industry has shown resilience and potential, and the rotomolding industry
needs to continue to strengthen scientific and technological innovation,
formulate the direction of functionalization, lightweight, high-quality, ecological
and intelligent direction, and enhance product added value and market
competitiveness. At the same time, strengthen industry self-discipline, establish
and improve the industry standard system, improve product quality, and
establish a good industry image. Expand international exchanges and
cooperation, enhance the international influence of China's plastics industry,
participate in the formulation of international standards, and strengthen
international exchanges and cooperation. The service work of the rotational
molding industry will focus on green and sustainable development, expansion
of application fields and strengthening international exchanges and cooperation
to promote the sustainable and healthy development of the industry.
Sun Liguo, member of the Party Working Committee and deputy director of the Management Committee of Hebei Xingtai Economic Development Zone, delivered a speech.
Liu Shu, deputy chairman of the China Plastics Processing Industry Association, read out the reply of the China Plastics Association on the members of the fifth council of the Rotomolding Committee. The meeting also deliberated and approved the "Work Report of the Fourth Council of the Rotational Molding Special Committee of the China Plastics Association", the "Financial Report of the Fourth Council of the Rotational Molding Special Committee of the China Plastics Association", the "Work Regulations of the Rotational Molding Special Committee of the China Plastics Association (Revised Draft)" and the election and voting methods of the fifth council of the Rotational Molding Special Committee. The meeting elected the leadership team of the fifth council of the Rotomolding Committee of the China Plastics Association. The new director unit is Hebei Jinhoudun Plastic Co., Ltd., the executive deputy director unit is Shanghai Chunxu Mould Industry Co., Ltd., the deputy director unit is Jiangsu Shengtai Anti-corrosion Equipment Co., Ltd., Yantai Fangda Rotomolding Co., Ltd., Zhejiang Ruitang Plastic Technology Co., Ltd., Qingdao Luotech Yili Automobile Rubber and Plastic Products Co., Ltd., Wenling Xuri Rotomolding Technology Co., Ltd., Dongguan Yongxingfu Hardware and Plastic Co., Ltd., Anhui Ningguo Tianyi Rotomolding Co., Ltd., Ningbo Kuer Plastic Technology Co., Ltd., Guoneng (Beijing) New Material Technology Co., Ltd., and appointed Shi Chuncai as the secretary-general of the Rotational Molding Special Committee of China Plastics Association.
Chairman Wang Zhanjie issued a letter of appointment to the director and deputy director unit.
Liu Shu, vice chairman of the board of supervisors, issued a letter of appointment to the governing units.
Li Yanping, the director unit of the Rotomolding Special Committee, issued a letter of appointment to the secretariat and awarded honorary certificates to outstanding rotational molding enterprises and individuals.
Huang Yang, executive deputy director of the Rotomolding Committee, issued a
letter of appointment to the experts of the Rotomolding Committee.
In the technical exchange session, the annual meeting invited domestic experts to give a total of 10 special reports on rotomolding materials, molds, equipment, products, enterprise digitalization, etc., namely: Li Yanping, Director of the Rotomolding Special Committee of China Plastics Processing Industry Association, "Empowering Enterprises and Strengthening Enterprises", Wen Yuan, Deputy Secretary-General of the Rotomolding Special Committee of China Plastics Association, "China Plastics Process in 2024", Li Jiangmou of Guangdong Shunjing Software Technology Co., Ltd., "Case Exploration of Digital Factory of Rotomolding Enterprises", Shi Haifeng of Ningbo Rui Rhenium Powder Coating Co., Ltd. Application of coatings/liners", Sha Guopei of Jiangsu Haiyang Nylon New Materials Co., Ltd. "Innovative Nylon New Materials Leading the New Development of the Industry", Wang Jiwu of Pesco (Dongguan) Machinery and Equipment Co., Ltd. "Intelligent Rotomolding - Green and Sustainable Solutions", Lalisa Aurpongpun of Jiexi Marketing (Shanghai) Co., Ltd. "Rotomolding Application Products and Solutions", Li Jun of Wenling Rising Sun Rotomolding Technology Co., Ltd. "How to Achieve Efficient, Safe and Energy-saving Production of Rotomolding", Ren Baixia of Guoneng (Beijing) New Material Technology Co., Ltd. "Cross-linked polyethylene and its application in the field of chemicals", Xu Kejie of Zhejiang Ruitang Plastic Technology Co., Ltd. "Analysis and solution of pores of rotomolded parts".
On the evening of May 15, the Council of the Rotomolding Professional
Committee of China Plastics Processing Industry Association was held and
voted to pass the relevant proposals.
Special statement: The above content (including pictures or videos) is uploaded and published by users of the official account "The Most Rolling Mold", this site is reproduced by the editor of this website, the purpose of reprinting is to convey more information, and does not mean that this website agrees with its views and is responsible for its authenticity. If it involves the content of the work, copyright and other issues, please contact this website within 30 days, and we will delete the content!
- Mobile website
- WeChat